Spa Flush
€30.00
DO NOT MIX WITH OTHER PRODUCTS.
DO NOT DISSOLVE BEFORE USE.
Instructions
- Remove the filter cartridge and ensure you have a residual disinfectant level of 3 – 5mg/l (ppm).
- Add the required dose directly into the hot tub whilst the pump(s) are on (with air controls closed) to assist product distribution.
- Allow to circulate for 1 hour, then drain the tub, rinse any residues to waste, then refill with clean fresh water.
Spa Dose Rates :
1,000 Lt. (220 gallons) Dose Rates : 250ml
1,500 Lt. (330 gallons) Dose Rates : 375ml
Warning: Do not use together with other products. May release dangerous gases (chlorine).
Precautions: Never mix chemicals, except by dosing into the spa separately and at different times. Never add chemicals to the water when bathers are in the spa. Store in a cool, dry, well ventilated, secure place away from oxidising and reducing agents, eg, petrol, oil, solvents and organic materials; ammonia, fertiliser and nitrogen compounds; strong acids and alkalis. Avoid direct contact with pool chemicals. Should there be skin contact with chemicals, wash thoroughly.
Disposal When empty and providing it has been rinsed out on the spa. this container may be disposed of via household recycling.
5 in stock
Description
Specially formulated to clean out the waste – such as oil deposits and soap – that has accumulated in the internal pipework and equipment of spas and hot tubs, which if not removed can act as a breeding site for bacteria.
Treatment should ideally be carried out at least every 12 weeks prior to drain down as this will assist in the removal of biofilm.
- A 1 litre bottle is sufficient for 4 treatments – making it an economical choice!
Hazard statements: H314 Causes severe skin burns and eye damage
